Autotrol Water Softener Operating & Maintenance Manuals & Guides
Where to find the manual for your water conditioner or water softener.
Direct links to free, download-able water softener manuals or water conditioner manuals for many Autotrol water softener brands & models.
Select the correct installation or operation & repair manual for your Autotrol water softener brand and model to be sure that you have exactly the right instructions for installing, maintaining, or troubleshooting your water conditioner.
InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website.
- Daniel Friedman, Publisher/Editor/Author - See WHO ARE WE?
The following list of water softener or water conditioner manuals is for all water softeners beginning with Autotrol;
Above: the Autotrol Logix 460TC softener control, also sold as Pentair 460i/460TC - the manual for this control is given in the list below.
...
Below you will find questions and answers previously posted on this page at its page bottom reader comment box.
On 2021-08-11 by Inspectapedia Com Moderator
@Laurie Kukurin,
Sure
Take a look at this Alpha Plus ELIMINIATOR PRO WATER SOFTENER MANUAL [PDF] and compare that with your unit.
https://inspectapedia.com/plumbing/Eliminator-Pro-Water-Softener-Manual-Alphaplus.pdf
Also because this softener often uses an Autotrol control head be sure to see the Autotrol resources on this page.
On 2021-08-11 by Laurie Kukurin
Hello! We are not sure if our water softener is working or not? Desperately need to find a manual for the Eliminator Pro-Series 48 Water Softener. Does anyone have a copy to share or any advice? Thank you, Laurie
On 2016-01-25 by Scott
Thanks. The salt tank is full and appears fine. I will try the manual regeneration cycle and see if that makes a difference.On 2016-01-24 by (mod) re: Autotrol 460i water softener controller settings when number of occupants is less
First check the salt tank, then try a manual regen cycle; Also have the water tested for hardness as that level could have changed and thus would require a softener adjustmentOn 2016-01-23 by Scott
I have an Autotrol 460i water softener controller. The original settings were for a family of 4 and were
Hardness=11; Capacity=24 and Brine=8 and the water was at an acceptable soft level.
The family has decreased to 2 recently and we have noticed that the water is no longer soft. Is this a setting issue or some other maintenance related issue like resin becoming old or the valve has something wrong? Thanks.
On 2017-08-16 by Lotty
I have a Autotrol Performa Prosoft. I'm told it should regenerate at "0" capacity. I noticed it was regenerating at 50, then 80. Now it regenerates at around 150 gallons. I have had the Culligan man here twice for this issue. The first time, I guess he thought I didn't know what I was talking about.
When he had to come back for free, he asked me again what it was doing. After I explained, he said he had no clue and would have to ask around. I am being ignored now. The first time he was here, he said my water had more iron so he increased the hardness. My unit is now regenerating every other day when it was going about once a week before.
So I get a little over 400 gallons at regeneration but at 150, it dumps and goes again! My unit is 12 years old.
...
Continue reading at WATER SOFTENER ADJUSTMENT & CONTROLSor select a topic from closely-related articles below, or select a topic from the closely-related articles below, or see the complete ARTICLE INDEX.
Or see these
AUTOTROL WATER SOFTENER MANUALS at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.
Or see this
Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia
Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.
Search the InspectApedia website
Note: appearance of your Comment below may be delayed: if your comment contains an image, photograph, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. Apologies for the delay.
Only one image can be added per comment but you can post as many comments, and therefore images, as you like.
You will not receive a notification when a response to your question has been posted.
Please bookmark this page to make it easy for you to check back for our response.
IF above you see "Comment Form is loading comments..." then COMMENT BOX - countable.ca / bawkbox.com IS NOT WORKING.
In any case you are welcome to send an email directly to us at InspectApedia.com at editor@inspectApedia.com
We'll reply to you directly. Please help us help you by noting, in your email, the URL of the InspectApedia page where you wanted to comment.
In addition to any citations in the article above, a full list is available on request.