InspectAPedia®   -   Search InspectApedia

Water conditioner control valve (C) D Friedman B B Water Softener Manual FAQs
Q&A on finding Guides to Water Softener Installation, Maintenance & Repair

Water Softener Operating & Maintenance Manuals & Guides

Where to find the manual for your water conditioner or water softener.

Direct links to free, download-able water softener manuals or water conditioner manuals for many water softener brands & models.

Select the correct installation or operation & repair manual for your water softener brand and model to be sure that you have exactly the right instructions for installing, maintaining, or troubleshooting your water conditioner.

InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website.

Water Softener Installation, Operation & Service / Repair Manuals

These uestions and answers about water conditioner or water softener manuals and instructions for programming their controls as well as for their service and repair were posted originally at WATER CONDITIONER / SOFTENER MANUALS - where you will find an alphabetical list of free downloadable manuals for just about every brand of water softener or water conditioner. Please check that page.

On 2020-02-16 2 by (mod) - too much water or brine in the salt tank

Zi

Regarding: is there too much water or brine in the salt tank after a water softener regen cycle?

It may be perfectly normal to see water (or "brine") in the salt tank of your water softener, depending on

- the required salt dose for each regen cycle and thus how much water is pumped back into the brine tank at the end of a regen cycle, so that brine will be ready for the next regeneration cycle

and

- the level of salt in the brine tank; when salt is at lower levels, say half or less of the brine tank volume, then it's more - common to see water or brine above the salt.

See the diagnostic and repair procedures at BRINE TANK DIAGNOSIS & REPAIR

On 2020-02-16 by Zisis

Water softener tank reads Brine Remains. What does this indicate?

On 2020-02-16 2 by Anonymous

Brine remains

 

On 2019-12-09 by Ulf

Thanks for your reply, I Will be back?

Ulf

On 2019-12-09 - by (mod) - sell me spare parts for a water conditioner control mod 440.

Ulf:

Sorry, but we cannot provide the product or service that you asked about. We do not sell anything. No products, no services.

InspectAPedia.com provides building and environmental diagnostic and repair information. In order to absolutely assure our readers that we write and report without bias we do not sell any products nor do we have any business or financial relationships that could create such conflicts of interest.

InspectAPedia is an independent publisher of building, environmental, and forensic inspection, diagnosis, and repair information for the public - we have no business nor financial connection with any manufacturer or service provider discussed at our website. We very much welcome critique, questions, or content suggestions for our web articles.

Website content contributors, even if it's just a small correction, are cited, quoted, and linked-to from the appropriate additional web pages and articles - which benefits us both. Working together and exchanging information makes us better informed than any individual can be working alone.


However if you attach a photo of the data tag (s) for your water conditioner and identify the brand and model it may be possible to point you directly to the appropriate manufacturer as a parts source.

On 2019-12-09 by Ulf Alfredsson

My e mail is stenshult@icloud.com

Ulf Alfredsson

Hello
I'm looking for spare parts for a water conditioner control mod 440.
The spare part I'm looking for is an injector access plug.
Your spare parts list indikatorers igen 15 and Therese numbers.

8F-AA/150N 150 G7.
8F-BB/150N 150 G8
8F-CC/150N 150 G9

Whichever of these Numbers fots into mod. 440

Are these in stock

Sincerely

Ulf Alfredsson


On 2019-04-01 by (mod) - where to buy plastic elbow for water softener or brine tank

Go to

- a plumbing supplier - or local water softener supplier as often these parts are standard across brands and models

or

- identify the equipment (water softener brand and model) then look in the IO Manual for your softener (you can download free manuals here at Inspectapedia.com too) and get the exact part number from the manual's parts explosion and you can order that from the manufacturer

We do not sell anything.

InspectAPedia.com provides building and environmental diagnostic and repair information.

In order to absolutely assure our readers that we write and report without bias we do not sell any products nor do we have any business or financial relationships that could create such conflicts of interest.

InspectAPedia is an independent publisher of building, environmental, and forensic inspection, diagnosis, and repair information for the public - we have no business nor financial connection with any manufacturer or service provider discussed at our website. We very much welcome critique, questions, or content suggestions for our web articles.

A brief summary about InspectAPedia.com can be read at https://inspectapedia.com/About_Us.htm

On 2019-04-01 by Yvonne St-Coeur

I would like this piece


On 2018-12-24 by (mod) -

Mary in our list of WATER SOFTENER MANUALS starting at https://inspectapedia.com/plumbing/Water_Softener_Manuals.php

find the brand and model of your water softener and down load the free manual for your unit.

I have to offer that advice because clock and timer setting procedures vary considerably depending on the water softener brand and model, ranging from twisting a mechanical dial to programming an electronic display.

On 2018-12-20 by Mary

How do I set the timer on my water softeners

On 2018-12-2- by (mod) - how to set the softener timer?

Mary in our list of WATER SOFTENER MANUALS starting at inspectapedia.com/plumbing/Water_Softener_Manuals.php

find the brand and model of your water softener and down load the free manual for your unit.

I have to offer that advice because clock and timer setting procedures vary considerably depending on the water softener brand and model, ranging from twisting a mechanical dial to programming an electronic display.

Debbie:

You can find Fleck softener manuals under the letter "F" in the Water Softener Manuals page whose link I give above.

On 2018-12-20 by Mary

How do I set the timer on my water softeners


On 2018-10-20 by Bill

How to program watco softnrt

On 2018-09-24 by (mod) -

Sorry Steve you didn't attach the photo. Please try again - use the "add image" button.

On 2018-09-19 by Steve

Does anyone know the Make, Model and Manufacturer of this control head ?
Am looking for instructions on how to operate


On 2018-07-29 by Craig

I have a control identical to the one on the cover of your web page. Are the pins to be in for regeneration or out

I have a control identical to the one on the cover of your web page. Are the pins to be in for activation or out

On 2018-06-11 by (mod) -

Thanks for asking, Ron.

The bypass valve on a water softener takes the device out of service.

In NORMAL or IN USE mode building water passes through the water softener and is treated or softened - thst is, calcium and magnesium ate removed from the water.

In BYPASS mode buildong water bypasses the water softener - it does not go through th e water softener and so is not treated.

During oeriodic water softener regeneration the softener does temporarily into bypass mode automatically.

You can also manually put the softener into bypass mode. You might do this temporarily, for example during repairs.

You can read about using the bypass valve in any water softener manual such as those given in the article above.

On 2018-06-11 by Ron

What is the bypass valve for


On 2018-04-0 by (mod) -

Naomi,
WATER SOFTENER IDENTIFICATION at https://inspectapedia.com/plumbing/Water-Softener-Identification.php

might help you identify the brand of your water softener.

If you're still stuck, use the picture frame icon next to the Comment button to post photos of the whole water softener and closeups of its control head and any labels and we may be able to research further.

Often water softeners are sold under local brands but produced by just one of a small number of manufacturers, so a more generic control manual may suffice.

In the article above on this page read the section titled

Un-Branded or Generic Water Softener Controls & Manuals

On 2018-04-08 by Naomi

I can not find anything on this water softener. Can you help me? The model number is 9DTS-40S Serial number 02-97-106202

On 2018-04-03 by (mod) - find a softener brand and model name on the equipment or its data tag

James

Can you find a brand and model name on the equipment or its' data tag, that'd sure help. Or attach photos of the equipment using the picture frame icon

On 2018-04-02 by James Walthorn apviesm-5ac

Reset my water softener,got new water heater and my manuel got all wet.

Company went out of business,and need to reset,but don't know how. My model number is on my control panel is apviesm-5ac serial number 01656369 it is regan every 3 days needs to regan every 14 days and it's 48000 grain thanks

 


...

Continue reading  at WATER CONDITIONER / SOFTENER MANUALS - topic home, or select a topic from closely-related articles below, or select a topic from the closely-related articles below, or see the complete ARTICLE INDEX.

Or see these

Water Softener Articles

Suggested citation for this web page

WATER CONDITIONER / SOFTENER MANUALS FAQs at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.


Or see this

INDEX to RELATED ARTICLES: ARTICLE INDEX to WATER TREATMENT SYSTEMS

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

Ask a Question or Search InspectApedia

Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.

Search the InspectApedia website

Note: appearance of your Comment below may be delayed: if your comment contains an image, photograph, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. Apologies for the delay.

Only one image can be added per comment but you can post as many comments, and therefore images, as you like.
You will not receive a notification
when a response to your question has been posted.
Please bookmark this page to make it easy for you to check back for our response.
Our Comment Box is provided by Countable Web Productions countable.ca

Comment Form is loading comments...

Citations & References

In addition to any citations in the article above, a full list is available on request.



ADVERTISEMENT