Septic System Model Regulations for New Septic System Product/System
Approval
Interim approval of new or alternative septic system products, designs, or components:
These model septic design regulations discusses the procedures for interim approval for new septic system products other septic system types besides those already discussed in detail here.
This document uses the New York State wastewater treatment standard for individual household septic systems (Appendix 75-A) to provide an example of state regulated design and installation of both conventional tank and leach field septic systems and alternative septic system designs, including raised septic systems, septic mound systems, intermittent sand filter septic systems, and evaportion-transpiration septic systems.
InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website.
- Daniel Friedman, Publisher/Editor/Author - See WHO ARE WE?
The example given below is derived from New York State's Septic System Design Regulations, Appendix 75-A.11. The regulation gives wide latitude to the regulating authority to grant interim approval for the installation and use of new or alternative septic system components and designs.
In our OPINION this breadth is appropriate as a regulation or law can have difficulty anticipating the specifics, components, materials and efficacy of advancements in septic and onsite wastewater treatment.
A regulating authority should not rule out the possibility of making use of new approaches that may significantly improve the level of wastewater treatment and that may thus reduce the risk of environmental impact of private onsite wastewater treatment systems.
The Aqua2Use graywater treatment filter system shown at page top is discussed in detail at GREYWATER SYSTEMS.
Effective Date: 12/01/90
Title: Appendix 75-A.11 - New product/system design interim approval
Section 75-A.11 New product/system design interim approval.
Based upon submission of engineering research and testing data indicating
that certain products, design and performance are equivalent to these standards,
the commissioner may grant interim approval for the use of systems, products
or procedures differing from these standards.
...
Continue reading at SEPTIC SYSTEM DESIGN ALTERNATIVES - topic home, or select a topic from the closely-related articles below, or see the complete ARTICLE INDEX.
Or see these
DESIGN APPROVAL for NEW or INTERIM SEPTIC SYSTEMS & PRODUCTS at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.
Or see this
Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia
Questions & answers or comments about regulating the approval of new or alternative septic system products & designs.
Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.
Search the InspectApedia website
Note: appearance of your Comment below may be delayed: if your comment contains an image, photograph, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. Apologies for the delay.
Only one image can be added per comment but you can post as many comments, and therefore images, as you like.
You will not receive a notification when a response to your question has been posted.
Please bookmark this page to make it easy for you to check back for our response.
IF above you see "Comment Form is loading comments..." then COMMENT BOX - countable.ca / bawkbox.com IS NOT WORKING.
In any case you are welcome to send an email directly to us at InspectApedia.com at editor@inspectApedia.com
We'll reply to you directly. Please help us help you by noting, in your email, the URL of the InspectApedia page where you wanted to comment.
In addition to any citations in the article above, a full list is available on request.