InspectAPedia®

white mold on pine paneling is hard to see unless illuminaged correctly

Use Light to Find Mold in Buildings

InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website.

Proper use of lighting & flashlights can find otherwise almost invisible mold contamiation on surfaces:

This article describes how make effective use of light such as from a good flashlight to find hard to see mold in buildings. How we aim the light and how we actually look makes the difference between finding or completely missing light and hard-to spot indoor mold contamination on building surfaces and materials.



Green links show where you are. © Copyright 2017 InspectApedia.com, All Rights Reserved.

USING LIGHT to FIND MOLD - Using proper lighting to see important mold contamination in buildings

Aiming light along the surface

Proper use of and aiming of light or a flashlight when looking for mold in buildings can make the difference between seeing and missing what might be the most important mold reservoirs in a given structure.

Like the Purloined letter problem mold may be in plain sight but may be hard to see, until you know how to look.

One result is that people who are testing mold often collect the "easy to see" mold but perhaps not the most important mold in a building. Here's how to do it right - in this brief article.

For a more extnsive article with more photos and advice on how to use lighting and how to aim a flashlight to spot hard to see mold, read USE A FLASHLIGHT. In most cases, proper use of a flashlight can help spot mold on paneling and other building surfaces.

How and where you shine light is of crucial importance when looking for mold in buildings.

Light-colored mold such as some members of the Aspergillus sp. and Penicillium sp. groups are often the dominant problem-mold in buildings but these offenders are often missed by a casual inspection because they can be hard to see on surfaces.

You need a bright flashlight and you need to know how to use it. Shine the light along the surface being examined, not straight at it.

As you'll see in the mold photographs shown here, using your light carefully can make a big difference in what mold you find and where you find it. Just looking for "black mold" risks missing the important mold in a building.

Aiming light properly shows the light-colored mold next to the black mold

Light colored mold next to obvious black mold - Aiming a bright flashlight along this wall surface where dark mold was obvious shows a light gray/green fungal colony which in fact was far more toxic and thus important to select as an additional source for surface sampling using adhesive tape.

Aiming light properly shows the light-colored mold on this paneling

Light colored toxic mold on paneling can be hard to see in ordinary lighting and requires careful inspection. But notice how the lighting shows that this paneling is buckled.

I'd suspect that it has been exposed to high moisture if not water, and that there is risk of hidden mold on the cavity side of this material. Further inspection was needed.

direct lighting hides problematic light colored mold colony on this wainscot paneling

Light colored toxic mold on paneling is not visible because light is being shone directly onto the wainscot wood paneling surface.

Aiming a light or flashlight at roughly right angles to a surface means most of the light rays bouncing back to your eye are coming off that surface at the same angle - the light will have trouble showing the profile or edges of light-colored or other small particles.

direct lighting hides problematic light colored mold colony on this wainscot paneling

Now try shining a light along the surface - this easily shows the white mold colony that was practically invisible before.

Aiming a light or flashlight along the surface means that some of the light rays are bounced off of the profiles or sides of small particles on that surface, making them easier to see. I'm simplifying the physics of light a bit but you can see the point of these illustrations of finding hard-to-spot light colored mold on a building surface.

Even dust, or any other surface irregularities show up better with this method of inspection. we have used this method of oblique light direction to spot drywall nails as a quick way to find a wall stud when hanging a picture.)

For our longer article with more photos and advice on how to use lighting and how to aim a flashlight to spot hard to see mold, read LIGHT, FLASHLIGHT for MOLD - proper use of a flashlight can help spot mold on paneling and other building surfaces.

More examples of how light can make hard-to-see mold contamination show up are at WHITE MOLD PHOTOS

Another example of use of oblique lighting to find building defects is illustrated at PLASTER BULGES & PILLOWS.

Forensic Building Investigation, Light Articles

...


Continue reading at LIGHT, FLASHLIGHT for MOLD or select a topic from closely-related articles below, or see our complete INDEX to RELATED ARTICLES below.

Or see FIND MOLD, ESSENTIAL STEPS - home

Or see FORENSIC INVESTIGATION of BUILDINGS

Or see HIDDEN MOLD, HOW TO FIND

Or see WHITE MOLD PHOTOS

Suggested citation for this web page

LIGHT AIM FINDS MOLD at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.

INDEX to RELATED ARTICLES: ARTICLE INDEX to ARTICLE INDEX to BUILDING FORENSICS

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

Or see

INDEX to RELATED ARTICLES: ARTICLE INDEX to BUILDING ENVIRONMENT

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

Or see

INDEX to RELATED ARTICLES: ARTICLE INDEX to BUILDING INDOOR AIR QUALITY IAQ

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

Or see

INDEX to RELATED ARTICLES: ARTICLE INDEX to MOLD CONTAMINATION & REMEDIATION

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia


...

Frequently Asked Questions (FAQs)

Click to Show or Hide FAQs

Ask a Question or Search InspectApedia

Use the "Click to Show or Hide FAQs" link just above to see recently-posted questions, comments, replies, try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.

Search the InspectApedia website

Comment Box is loading comments...

Technical Reviewers & References

Click to Show or Hide Citations & References

Publisher's Google+ Page by Daniel Friedman