InspectAPedia ^®

Regulation of Septic Systems & Sewage Treatment Systems by other agencies - New York State Septic System Design Regulations 75-A.2
InspectAPedia^®  -    

• Guide to agencies regulating sewage treatment systems

Section 2 of the septic design regulations discusses regulation of wastewater treatment by other agencies such as the Adirondack Park Agency and Local Health Departments. This document uses the New York State wastewater treatment standard for individual household septic systems (Appendix 75-A) to provide an example of state regulated design and installation of both conventional tank and leach field septic systems and alternative septic system designs, including raised septic systems, septic mound systems, intermittent sand filter septic systems, and evaportion-transpiration septic systems.

Citation of this article by reference to this website and brief quotation for the sole purpose of review are permitted. Use of this information at other websites, in books or pamphlets for sale is reserved to the author. Technical review by industry experts has been performed and is ongoing - reviewers welcomed and are listed at "References."

© Copyright 2009 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

Title: Appendix 75-A.2 - Regulation by other agencies - Effective Date: 12/01/90

(a) Where sewage treatment systems are to be located on the watersheds or well head area of public water supplies, the rules and regulations enacted by the State Department of Health for the protection of these supplies must be observed. Where systems are to be located on the watershed of any stream or body of water from which the City of New York obtains its water supply, the approval of the New York City Department of Environmental Protection, Division of Water Resources, must also be obtained.

(b) This appendix establishes the minimum standards acceptable in New York State. Other agencies, such as the Adirondack Park Agency or local health departments may establish more stringent standards. Where such standards have been established, or approval by another agency is required, the more stringent standard shall apply.

© A local health department may not adopt standards less stringent than the State standard unless a General Waiver has been issued by the State Commissioner of Health or his designated representative as provided in Part 75 of this Title, or the local health department is otherwise legally authorized to adopt such standards.

(d) When individual sewage systems overlay a drinking water aquifer, local health departments may establish population density limits and minimum lot sizes for residential development with on-site sewage treatment systems.

Share this Article      

...

Technical Reviewers & References

Search InspectAPedia

• Daniel Friedman - principal author/editor of the InspectAPedia^® Website
• InspectAPedia Bookstore lists recommended books, organized by topic & available for purchase. Most of our articles also include a list of recommended books for the specific article topic as well as other references, and information sources.
• Critique, contributions wanted: Contact Us to suggest corrections or additions to articles at this website, and if you wish, to receive online listing and credit as a contributor. Particular thanks are due to the many experts and also consumers who read and critique technical articles at InspectAPedia.com.
• Additional technical contributors & reference sources for this article are listed below.

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

SEPTIC SYSTEMS HOME
SEPTIC INFO ARTICLES
HOME BUYERS GUIDE to SEPTIC SYSTEMS
SEPTIC SYSTEMS ONLINE BOOK
SEPTIC PUMPING REPAIR
SEPTIC TREATMENTS
SEPTIC CONSULTANTS
SEPTIC AUTHORITIES
  75-A.0 New York State Regulation of Private Septic Systems
  75-A.1 Introduction to Septic Systems, Definitions of Septic System Terms
  75-A.2 Regulation of Sewage Treatment Systems by other agencies
  75-A.3 Sewage flows and design flow estimates
  75-A.4 Soil and site appraisal for Septic Systems
  75-A.5 House or building sewer line specifications
  75-A.6 Septic tank capacity requirements, installation, and placement
  75-A.7 Distribution lines, distribution boxes, gravity flow, pressure distribution, dosing, siphons
  75-A.8 Subsurface treatment of effluent, absorption field requirements, leach field design criteria
  75-A.9 Alternative Septic System Designs
  75-A.10 Other systems
  75-A.11 New product/system design interim approval
SEPTIC SYSTEM BOOKS REFS CODES
SEPTIC SYSTEM DESIGN MANUAL - Online
SEPTIC SYSTEM DESIGN BASICS
SEPTIC SYSTEM DESIGN ALTERNATIVES

More Information on Building Diagnostic Inspections and Repairs

• The Septic System Information Website home page for this topic
• Septic Systems Inspection, Testing, & Maintenance- online textbook. Detailed how to inspect, maintain, repair information
• The Home Buyer's Guide to Septic Systems
• Septic Tank Pumping Guide: When, Why, How to pump the septic tank
• Home & Outdoor Living Water Requirements
• Septic Tank Capacity vs Usage in Daily Gallons of Wastewater Flow, calculating required septic tank size, calculating septic tank volume from size measurements
• How Big Should the Leach Field Be? - table of soil percolation rate vs. field size
• Septic System Drainfield Absorption System Biomat Formation - what leads to drain field clogging and expensive drainfield repairs
• Table of Required Well & Septic Clearances: Distances Between Septic System & Wells, Streams, Trees, etc.

InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting

Contact Daniel Friedman for website content suggestions or for fee-paid consulting