Question? Just ask us!
Free Encyclopedia of Building & Environmental Inspection, Testing, Diagnosis, Repair
InspectAPedia ® Home
AIR QUALITY STUDY San Miguel de Allende
BIRDS of NEW ZEALAND 2014
CACTUS, NOPAL PRICKLYPEAR
HIKING around San Miguel de Allende #2
HIKING around San Miguel de Allende #3
Jesus Takes the Bus - in San Miguel
PASSIVE SOLAR HOME, LOW COST
POETRY & SHORT FICTION, Daniel Friedman
POUGHKEEPSIE NY - The Big Tomato
SAN MIGUEL de ALLENDE - 88 Photos
SANGRE en ARTE de, FRIDA KAHLO
TANGO in SanMiguel
WEATHER in SAN MIGUEL de ALLENDE
SOLAR ENERGY SYSTEMS
AIR CONDITIONING & HEAT PUMP SYSTEMS
AIR LEAK MINIMIZATION
AIR LEAK SEALING PROCEDURE
AIR SEALING STRATEGIES
BIO-FUEL PRODUCTION & USE
EVAPORATIVE COOLING SYSTEMS
FLOOR POURED FINISH ON CONCRETE SLABS
FLOOR RADIANT HEAT Mistakes to Avoid
FRAMING DETAILS for BETTER INSULATION
FRAMING DETAILS for DOUBLE WALL HOUSES
FRAMING METAL STUD PERFORMANCE
FREEZE-PROOF A BUILDING
FROST HEAVES, FOUNDATION, SLAB
GREEN BUILDING CONSTRUCTION CODES GUIDES
GREENHOUSE DESIGN for SOLAR HEATING
GREENHOUSE / SUNSPACE GLARE
HEAT LOSS in BUILDINGS
HEAT LOSS DETECTION TOOLS
HEAT LOSS INDICATORS
HEAT LOSS PREVENTION PRIORITIES
HEAT LOSS R U & K VALUE CALCULATION
HEAT LOSS RATE CALCULATIONS
HEATING SMALL LOADS
HOUSEWRAP INSTALLATION DETAILS
HUMIDITY LEVEL TARGET
INSULATION IDENTIFICATION GUIDE
INSULATION LOCATION - WHERE TO PUT IT
LEED GREEN BUILDING CERTIFICATION
LEED Building Designation & IAQ
RADIANT SLAB FLOORING CHOICES
RADIANT SLAB TUBING & FLUID CHOICES
ROOF VENTILATION SPECIFICATIONS
ROOF ICE DAM LEAKS
SHEATHING, FOIL FACED - VENTS
SOLAR ENERGY SYSTEMS
SWEATING (CONDENSATION) on PIPES, TANKS
THERMAL EXPANSION of HOT WATER
THERMAL EXPANSION of MATERIALS
THERMAL IMAGING, THERMOGRAPHY
THERMAL MASS in BUILDINGS
THERMAL TRACKING & HEAT LOSS
VAPOR BARRIERS & CONDENSATION in BUILDINGS
VAPOR BARRIERS & HOUSEWRAP
VAPOR CONDENSATION & BUILDING SHEATHING
VENTILATION in BUILDINGS
WIND ENERGY SYSTEMS
WIND TURBINES & LIGHTNING
WINDOWS & DOORS
WINTERIZE A BUILDING
This article describes the construction and energy features of a low-budget passive solar home constructed in San Miguel de Allende Mexico.
We describe cost and design trade-offs made by the owner-builder Denise Gelpi Aughtman, a doctor of oriental medicine and acupuncture who practices in Mexico. The home is functional, occupied, has extremely low operating costs, and like most solar home projects, Aughtman has more improvements in the works. Our page top photo shows windows admitting morning solar gain in this nearly-balanced-energy passive solar home in San Miguel de Allende, Guanajuato, Mexico.
Green links show where you are. © Copyright 2015 InspectApedia.com, All Rights Reserved.
Like many homeowners who are attracted to homes designed to make use of renewable energy, Denise Aughtman, the owner-builder of the home described here could not approach her project with a fat wallet.
The modest passive solar design house described in this article provides a real-world example of a working solar home built on a shoestring and operated on a thread. Sited with a beautiful view of the mountains above San Miguel de Allende, and located a few kilometers outside of town, this modest home needed to provide shelter, beauty, and economy without breaking the bank.
The passive solar design Aughtman used to lay out and construct the home combines utter simplicity, very low cost, effective solar gains providing light and warmth during cold weather, very efficient use of water and electricity, and the beauty of open space inside the home, and views of the mountains over San Miguel de Allende in central Mexico.
The sense of smallness of the overall size of the home when first viewed from outside is promptly lost on entering the structure: Aughtman designed a single large room divided into kitchen, dining, living room, work, and sleeping areas by furnishings or bookshelves (photo at left). A single partition wall was constructed to provide privacy for the bathroom.
The structure is designed to permit a later addition of a second story, accessed by a separate stairwell in an attached tower.
Passive Solar Design Simplicity - Thermal Mass
The home is located on a high plain at approximately 6200 ft. in a climate that combines warm daytime temperatures with cool nights. Constructed of plastered masonry walls and roof on a poured concrete slab set just above grade, the home's thermal mass absorbs heat during warm hours and returns it to the occupants during chilly mountain nights.
Our weather table below shows that in the climate of this passive solar home, annual average low and high temperatures are 52-77degF. During hot weather, the night-cooled masonry walls and roof help keep the house cool during the day. During cooler months, passive solar gain to the building's masonry roof and walls provides warmth for nighttime heating.
Adjustment to the amount of solar gain from single-glazed windows around the curved-wall front of the home is provided simply by opening or closing curtains to admit or stop sunshine onto the tiled floor of the building's interior. Additional lighting for areas of the home most distant from the glass window and door wall are lit by fixed glass glazing in the upper walls and glass block skylights.
Aughtman's budget did not include radiant floor heating for this passive solar home; she reports that the home is adequately warmed during cool weather by the solar-heated masonry roof, walls, and when needed (open the curtains), the tile floor set directly onto the 6 to 12-inch thick concrete floor slab.
See THERMAL MASS in BUILDINGS for details about using thermal mass for building comfort.
Potable Water Supply & Rainwater Collection at a Passive Solar Home in Mexico
Water supply for home use as well as agriculture is critical in dry climates such as the Southwestern U.S., Mexico (the location of this home) and many other parts of the world. Our weather table below shows that in the climate of this passive solar home, rainfall varies from about 3 mm in the most dry month (February), to 129 mm in the wettest month (June).
While the home is supplied water from a nearby community well, Aughtman elected to make use of several designs to collect rainwater and to make simple use of graywater at her home.
Onsite Waste Disposal - Passive Solar Home Septic System in San Miguel de Allende
Graywater from the kitchen sink and bathroom shower/tub and sink as well as from a laundry is routed outside to a simple surface channel cut into the soil where it waters ornamental plants, fruit trees, and a vegetable garden.
While a professionally designed graywater system makes use of filtering, Aughtman's budget did not provide for a graywater holding tank, filtration, and a pump. Instead she makes sure that soaps used in the home are low-nitrate, low phosphate, biodegradable products. Washing machine drainage is passed through a simple external laundry filter to remove lint.
See GREYWATER SYSTEMS for design and maintenance details for graywater treatment/disposal systems.
Blackwater, sewage from the home's toilet is routed to a 1000 gallon site-built cesspool located on the property.
The volume of wastewater to be processed is low because of the separation of graywater for onsite irrigation use.
See TANK PUMPING FREQUENCY TABLE for general septic tank pumping frequency; those septic tank cleaning intervals would be significantly extended for this home of a single occupant, occasional guests, and graywater separation.
Composting Food Waste at a Passive Solar Home
In keeping with the energy conservation and recycling spirit of the Aughtman passive solar home, Denise has included a compost facility in a corner of her property (photo at left).
Because of the seasonally very dry climate in San Miguel de Allende, Aughtman covers the compost pile with plastic to improve its decay-conversion to mulch for use on her vegetable garden, fruit trees, and flowers.
Simply put, when outdoor temperatures vary roughly the same amount above and below the human comfort zone (65 degF to 70 degF) then in principle, a passive solar home should need almost no additional energy source to provide heating and cooling.
Our table of average weather conditions in San Miguel de Allende (below) shows that in that climate, while daytime highs are not much above the comfort point of 78 degF., nighttime lows average 26 degF below that number: solar heating of a thermal mass in the building is wanted for night time indoor comfort. (This information with other weather comments is also at WEATHER in SAN MIGUEL de ALLENDE).
At THERMAL MASS in BUILDINGS we describe a second home in this climate and we report that its typical morning low temperature in the coldest months falls to about 61 degF inside that home when no heating source is provided other than the daytime-warmed thermal mass of the building's masonry walls and roof.
1. Other San Miguel de Allende weather estimates including average high and low temperatures and rainfall vary slightly around these temperature and rainfall estimates. On average the warmest month in San Miguel de Allende is May, the coolest month in San Miguel de Allende is January, and the wettest month in San Miguel de Allende is July.
Continue reading at PASSIVE SOLAR PERFORMANCE PROBE
Green link shows where you are in this article series.
Frequently Asked Questions (FAQs)
No FAQs have been posted for this page. Try the search box below or CONTACT US by email if you cannot find the answer you need at InspectApedia.
Questions & answers or comments about how to design and build low-cost passive solar homes
Use the "Click to Show or Hide FAQs" link just above to see recently-posted questions, comments, replies, try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.
Search the InspectApedia website
HTML Comment Box is loading comments...
Technical Reviewers & References